Hardy ANY-WEIGH Bench Scales Manuel d'utilisateur télécharger pdf (Page 15)

Chapter 3 - Installation

3-3

FIG. 3-3 LEVELING SCALE

Step 4. Rotate the spirit level 90° and check for

level again.

Step 5. Adjust the leveling feet if necessary.

Universal Scale

Electrical Connections

Make sure the cable is not pinched and is clear of the

feet. The Bench Scale requires a recommended DC or

AC excitation voltage of 5 volts with a maximum of

15 volts. Wire the Scale cable to an instrument or

indicator following the color code label found on the

upper frame or as follows:

+ Excitation Red

+ Sense Blue

+ Signal Green

+ C2 Cal Gray

- Signal White

- Sense Brown

- Excitation Black

- C2 Cal Violet

WARNING USE CAUTION WHEN WIRING. MAKE SURE

TO DISCONNECT ALL POWER TO THE

SCALE. FAILURE TO REMOVE POWER CAN

RESULT IN SCALE OR INSTRUMENT DAM

Spirit Leve

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 49 50

Pas de commentaire

Hardy ANY-WEIGH Bench Scales Manuel d'utilisateur Page 15